User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 51 Revision 05
Figure 5-2 Front Panel of the RU
Table 33 RU Front Panel Interfaces
SN
Interface Name
Description
1
CH2
PA 2 Module Interface, 4.3-10 female Connector
2
CH1
PA 1 Module Interface, 4.3-10 female Connector
3
Modem Interface /Reserved
Reserved if no modem
4
Slave OP
Connection for EU or RU at the next higher level
5
Slave
Indicates Slave OP port operating status
6
MASTER OP
Connection for RU at the next lower level
7
Master
Indicates Master OP port operating status
8
RUN
Indicates device operating status
9
DEBUG
Connection for local PC through CAT-5 for local monitoring
10
GE
Wi-Fi signal output port
11
PWR
Electrical Power Line Interface
5.3. Indicator Description
Refer to Section 3.5 for details.
5.4. OMT Parameters, Alarms and Commands for the RU
See Section 2.3, OMT Display, for information on how to use the WebOMT interface to view and change parameters
s and run commands.