User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 52 Revision 05
5.4.1. RU User Parameters
Table 34 RU Device Information
Parameter
Description
RD/RW
Vendor
Name to distinguish from different manufacturers
RD
Product Model
/
RD
Serial Number
/
RD
RMON Mode
Current remote monitoring mode
RD
Software Upgrading Result
RD
Remote Upgrade Mode
/
RD
MON Edition
Current edition of remote monitoring software
RD
Device Edition(FPGA)
Device edition defined by FPGA
RD
Device Location
/
RW
Table 35 RU Network Management
Parameter
Description
RD/RW
Site ID
The unique identification number of the site in the system
RW
Device ID
Number to distinguish the subsets in the same site
RW
Date and Time
/
RW
5.4.2. RU Alarms
Table 36 CrossFire Alarms for the RU
Parameter
Description
RD/RW
Power Interruption Alarm
Electric supply failure
RW
MOV Alarm
Alarm when device leave the original installation location
RW
Open Case Alarm
Alarm when device is open
RW
Over-temperature Alarm
Alarm when device temperature over rated temperature threshold
RW
DPLL unlocked Alarm
Digital phase lock loop unlocked
RW
LO1~2 unlocked Alarm
Local Oscillation unlocked
RW
CH1~2 ALC Alarm
Alarm when ALC is working
RW
OP-slave Transceiver Alarm
OP-transceiver unplugged or failure (Port “Slave”)
RW
OP-master Transceiver Alarm
OP-transceiver unplugged or failure (Port “Master”)
RW
CH1~2 DL Under Output-power Alarm
Channel 1~4 output-power under rated threshold
RW
CH1~2 DL Over Output-power Alarm
Channel 1~4 output-power over rated threshold
RW
Link Alarm
Alarm when local RU cannot connect to the system
RW