User's Manual

CrossFire HP – All-Digital Transport System

User Guide

Figure 6-1 Wall Mounting Installation of an EU

6.3.3. Wall Mounting Installation (for RU)

To install the device using a wall mounting:

Note: Wall mounting installation of the POI is exactly the same as that of RU.

1) Front-mounting Installation (see Figure 6-2, Figure 6-3):

a) Choose an appropriate location. Mark 2*13 holes sites for the mounting bracketⅠto be attached to the

wall.

b) Drill at the two sites using a percussion drill and embed 2*M10*90 expansion bolts.

c) Fasten the mounting bracketⅡ to the back of device with 2*M6*14 screws.

d) Hang the device on the mounting bracket and fasten the case with 2*M10 nut.