User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 65 Revision 05
Figure 6-9 Step 4 of Suspension Installation
6.3.5. Pole Mounting (Only for RU, Optional)
To install the device using pall mounting (see Figure 6-10 and Figure 6-11).
Note: Pole mounting of the POI is exactly the same as that of RU.
1) Choose an appropriate location.
2) Fasten mounting bracketⅠto the side of device with 2*M6*14 screws.
3) Fasten the case to mounting bracketⅡand mounting bracket Ⅲwith 2*M10*200 bolts.