User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 90 Revision 05
connected to the EU and a maximum of five RUs can cascade when RU1 is directly connected to the AU. (See Figure 10-4)
The maximum bandwidth per operating band should be less than 60MHz and the maximum bandwidth of all operators
should be less than 200 MHz.
RU cascade and every unit
output same RF signal
Operator D
Operator A
AU
EU
Fiber
POI
A
B
C
D
RU1
Operator C
Fiber
Operator B
RU2
POI
A
B
C
D
RU3
Fiber
Fiber
POI
A
B
C
D
RU5
RU1
RU2
Fiber
Fiber Fiber
Max 5 RUs cascade connect
to AU directly
Max 4 RUs cascade connect
to EU
Fiber
Figure 10-4 Example for Cascading RU Application
10.5. WLAN Application
CrossFire provides a transparent pipeline for 10M/100M/1000Mbps Ethernet transmission. Each EU has six electrical
ports (GE1~GE6) for six WLAN signals to access. Meanwhile, six optical ports (OP1~OP6) correspond to GE1~GE6 for the
output signal. (See Figure 10-5) The flow path of the signal is:
Input LAN signals— EU— RU— AP— POI— Antenna-feeder system.
Note:
 The electrical port must correspond to an optical port, for example, GE1 corresponds to OP1.
 If multiple cascading RUs connect, the WLAN signal can be output from a random RU.
 If multiple cascading RUs connect and more than one AP device connects to the RUs, the WLAN signal can
be output from one RU, and the priority is RU1＞RU2＞RU3.