Installation Manual

HIGH POWER
43dBm Dual Band
Digital Radio
© Sunwave IM_CF_H2 v1.0.0 | 24 of 45
Contact us today:
www.sunwave.com
[e-mail]
Mount the E2-O on the Wall
Attach Handle to E2-O
Attach the 19" mounting brackets to the rear of the E2-O, using 4 screws M3×16 per bracket and the Phillips screwdriver. Observe
the orientation of the brackets.
Attaching a 19" Mounting Bracket
Mount E2-O to Wall
Marking the Position of Mounting Holes
1. Hold the E2-O to the installation location and
mark the position of the 4 mounting holes in
the mounting brackets; see arrows in 0
2. Drill the mounting holes according to the
chosen mounting accessories.
Mounting Completed
1. Attach the dowels, expansion screws, or the
similar and fasten the E2-O to the wall.