Installation Manual

HIGH POWER
43dBm Dual Band
Digital Radio
© Sunwave IM_CF_H2 v1.0.0 | 38 of 45
Contact us today:
www.sunwave.com
[e-mail]
Pole Installation
1. Install the handle and Bracket I to the back of H2RU.
2. Install the bracket II and Bracket III to the pole.
3. Hang the H2RU on the mounting bracket and fasten with nuts M10.
4. Connect the ground cable and power cable.
Extra accessories are required for pole installation and purchased separately.
Note: The diameter of Pole shall not be over 110mm or less than 55mm.