Installation Manual
HIGH POWER
43dBm Dual Band
Digital Radio
© Sunwave IM_CF_H2 v1.0.0 | 42 of 45
Contact
us
today:
www.sunwave.com
cf_support@sunwave.com
A2 Optical Port Description
Obtain the required lengths of optical fibers for all the optical connections and connect the fibers on the front panel of Access Unit.
The interface type of SFP transceivers is an LC connector.
It is important to label all ports on the fiber distribution panel correctly.
It is recommended to include additional length/slack in the optical fiber to allow future re-configurations without requiring
additional splices.
A2 Front Panel Interfaces
SN
Interface Name
Description
1
AU1
Connects Slave A2 1
2
AU2
Connects Slave A2 2
3
OP1/AU
For Master A2: connects EU/RU
For Slave A2: connects Master A2
4
OP2
Connects EU/RU
5
OP3
Connects EU/RU
6
OP4
Connects EU/RU
7
OP5
Connects EU/RU
8
OP6
Connects EU/RU
9
CONSOLE
Connects OMC or local PC through CAT-5 for local and remote monitoring
10
AP
Connects WLAN network adapters for monitoring device through Wi-Fi
11
STATUS
Indicates device operating status
12
DEBUG
Connects local debugging PC through a USB connection
13
ALARM I/O
Connects external environment alarm interface for environment monitoring
E2-O Optical Port Description
Obtain the required lengths of optical fibers for all the optical connections and connect the fibers on the front panel of the
Expansion Unit.
The interface type of SFP transceivers is an LC connector.