Installation Manual

MID POWER
4 x 37dBm Output
5G NR Compli
© Sunwave IM_CF_M2 v2.0.1 | 27 of 51
Contact us today:
www.sunwave.com
[e-mail]
Mount the E2-O on the Wall
Attach Handle to E2-O
Attach the 19" mounting brackets to the rear of the E2-O, using 4 screws M3×16 per bracket and the Phillips screwdriver. Observe
the orientation of the brackets.
Attaching a 19" Mounting Bracket
Mount E2-O to Wall
Marking the Position of Mounting Holes
1. Hold the E2-O to the installation location and
mark the position of the 4 mounting holes in
the mounting brackets; see arrows in the
picture.
2. Drill the mounting holes according to the
chosen mounting accessories.
Mounting Completed
1. Attach the dowels, expansion screws, or the
similar and fasten the E2-O to the wall.