Installation Manual
MID POWER
4 x 37dBm Output
5G NR Compli
© Sunwave IM_CF_M2 v2.0.1 | 47 of 51
Contact
us
today:
www.sunwave.com
cf_support@sunwave.com
A2 Optical Port Description
Obtain the required lengths of optical fibers for all the optical connections and connect the fibers on the front panel of Access Unit.
The interface type of SFP transceivers is an LC connector.
It is important to label all ports on the fiber distribution panel correctly.
It is recommended to include additional length/slack in the optical fiber to allow future re-configurations without requiring
additional splices.
A2 Front Panel Interfaces
SN
Interface Name
Description
1
AU1
Connects Slave A2 1
2
AU2
Connects Slave A2 2
3
OP1/AU
For Master A2: connects E2-O/RU
For Slave A2: connects Master A2
4
OP2
Connects E2-O/RU
5
OP3
Connects E2-O/RU
6
OP4
Connects E2-O/RU
7
OP5
Connects E2-O/RU
8
OP6
Connects E2-O/RU
9
CONSOLE
Connects OMC or local PC through CAT-5 for local and remote monitoring
10
AP
Connects WLAN network adapters for monitoring device through Wi-Fi
11
STATUS
Indicates device operating status
12
DEBUG
Connects local debugging PC through a USB connection
13
ALARM I/O
Connects external environment alarm interface for environment monitoring
E2-O Optical Port Description
Obtain the required lengths of optical fibers for all the optical connections and connect the fibers on the front panel of the
Expansion Unit.
The interface type of SFP transceivers is an LC connector.