Installation Manual

MID POWER
4 x 37dBm Output
5G NR Compli
© Sunwave IM_CF_M2 v2.0.1 | 14 of 51
Contact us today:
www.sunwave.com
[e-mail]
Rack Installation
The Access Unit is a 19” 1U equipment shelf. When installing the Access Unit in a rack, make sure the mechanical loading of the rack
is even to avoid a hazardous condition. The rack should safely support the combined weight of all the equipment and be securely
anchored. Installing the Access Unit in a climate-controlled room with sufficient air circulation is recommended as the maximum
ambient temperature is +50°C.
To install the Access Unit in the equipment rack.
1. Attach the 19" mounting brackets at the front of the A2, using 4 screws M3×6 per bracket and the Phillips screwdriver. Observe
the orientation of the brackets.
2. Recommended attaching the sliding rails to rack. (Not included in delivery).