User manual

First Layer
Position 4 large coals with their rear edges on the burner inserts. Place 3 large coals at the rear of the coal
support shelf and lay 2 further at the sides of the shelf. These coals are placed on their edge. 3 more large
coals are placed on the coal support shelf to complete the first layer. See fig 19.
Second Layer
Two triangular coals are placed one either side ensuring that they rest against the side and that they straddle
the gap between the front and second row large coal. Position the remaining 5 medium coals in the positions
shown in figure 20.
To obtain the best visual appearance it may be necessary to make slight adjustments to the position of the
coals.
NOTE: Additional coals must not be used. If any of the coals or the coal bed becomes damaged, lost or
broken, replacements must be obtained before the appliance is used.
Page 18