0102 095 50931 683(5 6,;7((1 19 USERS INSTRUCTIONS THIS CAT I2H APPLIANCE IS FOR USE ON NATURAL GAS G20 AT A SUPPLY PRESSURE OF 20 mbar IN GB & IE HAND THESE INSTRUCTIONS TO THE USER
Description The Super Sixteen NG inset is a decorative gas fire designed to fit a traditional fire surround and fireplace, with a chimney that conforms to a conventional Class I flue. i.e. Brick built of 227 x227mm (9 x 9ins) or 175mm (7ins) diameter lined or stone chimney with the fireback and fireplace components complying with BS 1251.
It is recommended that the appliance is serviced annually by a competent person and that the flue is checked for satisfactory clearance of products and that there is no excessive build up of soot. The curing effect of heating the coals will cause an initial odour which, although not harmful, may require additional ventilation until the odour has disappeared. This appliance will run on Full for approximately 4.4 hours on one therm of gas.
CLEANING Any debris or soot from the chimney or flue or, any soot that is formed during operation should be removed. Should any soot accumulation become excessive, the appliance should be allowed to cool completely before removing the fuel effect pieces from the fire for cleaning. Cleaning should be carried out in a well-ventilated area or in the open air, by gently brushing with the pieces held away from your face so that you avoid inhaling the dust.
Lay 3 large coals in the gaps between the triangular coals and the row of 4 coals and place 4 large coals on the triangular coals behind the second row of coals as shown in Fig. 3 & 4. Place the 8 small coals randomly and in a stable position between the peaks of the larger coals. To obtain the best visual appearance it may be necessary to make slight adjustments to the positions of the coals.
SPARES AND SERVICE For spares and service, apply to your local Supplier, Installer or direct to the address overleaf, stating that the appliance is a Flicker Flame 16” Inset and quoting the Serial Number from the Data Badge located on the front control panel behind the front cover. Advantage should be taken of regular servicing and inspection for gas appliances to ensure their continued safe operation. SHORT PARTS LIST Description Qty Coal Support L.& RH.
REGISTRATION RECORD Supplier’s Name and Address _________________________________________________________________________________ ___________________________________________________________________________________________ _ ___________________________________________________________________________________________ _ Installer’s Name and Address _________________________________________________________________________________ _________________________________________________________________________________
