Spec Sheet
Refer installation and servicing to qualied, licensed personnel. Always read Installation and Operating Manuals and consult local codes
before installation. Protect machines with properly rated circuit breakers ONLY. Warranty void if not properly installed.
Specifications subject to change without notice. Laundrylux assumes no responsibility for errors or omissions in this information.
Money boxes sold separately.
CROSSOVER 2.0 STACKED WASHER/DRYER SPECIFICATIONS
Model No. Gas
Metered (Coin) / Pump Model
WDHLPS817G
Card Ready / Pump Model
WDHLPS817GDC
Model No. Electric
Metered (Coin) / Pump Model
WDHLPS817E
Card Ready / Pump Model
WDHLPS817EDC
Motor
Variable-speed, reversible,
thermoprotected, high-eciency,
controlled induction
Electrical Rating
(Gas Model)
120 V/60 Hz / 1-phase
Breaker Fuse Requirements
(Gas Heat)
15A
Breaker Fuse Requirements
(Electric Heat)
30A
Washer Cylinder Volume 3.5 cu ft (98 liters)
Dryer Cylinder Volume 7.0 cu ft (200 liters)
Washer Cylinder Diameter 21 5/8 in (550 mm)
Dryer Cylinder Diameter 26 in (660 mm)
Washer Cylinder Depth 18 1/4 in (464 mm)
Dryer Cylinder Depth 22 in (559 mm)
Wash/Dry Capacity 22 lbs (10 kg)
Airow 170 c fm
Gas Heating 18,000 BTU/hr
Electric Heating 5.0 kW
Gas Connection 3/8 in MNPT
Wash Speed 45 RPM
Tumbling Speed 50 rpm
Exhaust Connection 4 in diameter
Approx. Net Weight
Dryer - 158 lbs (71.7 kg)
Washer - 299 lbs (136 kg)
CROSSOVER 2.0 STACKED WASHER/DRYER SPECS AT A GLANCE
Capacity 22 lb / 10 kg
Overall Height 85 in (2235 mm)
Height to Center of Door N/A
Height to Bottom of Door N/A
Overall Width 27 in (686 mm)
Overall Depth 29 in (737 mm)
Depth w/ Door Open 90º N/A
03.26.19
CROSSOVER 2.0 STACKED WASHER/DRYER DIMENSIONS
The robust 8-point suspension
features advanced technology to
keep loads in balance, eliminate
oversuds, and nish the cycle.
Premium counterweights are
constructed of solid steel providing
additional strength and enhancing
the longevity of the machine.
8-Point Suspension
Two commercial grade SKF bearings
are sealed for maximum protection.
Three individual seals with 5 lips
provide a water-tight barrier around
the drive shaft to protect the
bearings from damaging moisture.
Heavy Duty SKF Bearings
Crossover 2.0 washers are easily
programmable with promotional
vend pricing at specied times and
days. Multiple promotion events can
be programmed at one time using
the built-in real time clock.
Time-of-Day Promo Pricing