Crossover Stacked Dryers Specs
74 7/8”
(190.3mm)
75 13/16”
(192.6mm)
9 11/16”
(24.7mm)
47 5/8”
(121mm)
CROSSOVER StaCk dRyER/dRyER SPECifiCatiOnS
Model No.
Metered/Card Ready - Gas
DDSGM/DDSGC
Model No.
Metered/Card Ready - Electric
DDSEM/DDSEC
Motor 1/3 HP
Electrical Rating
(Gas Model)
120VAC/60Hz/2W/1-phase
Electrical Rating
(Electric Model)
208-240V/ 60Hz/1-phase
Breaker/Fuse
Requirements (Gas)
15A
Breaker/Fuse
Requirements (Electric)
30A
Cylinder Volume 7 1/2 cu ft (212 liters)
Cylinder Diameter 25 3/4 in (654 mm)
Cylinder Depth 24 in (609 mm)
Capacity (Dry Weight) 22 lbs (10 kg)
Door Opening 17 1/4 in (438 mm)
Airow (Gas & Electric) 220 cfm (373 m^3/h)
Electric Heating (240VAC) 5.4 kW
Gas Heating 26,000 Btu/hr (6,550 kcal/hr)
Gas Connection 3/8 in MNPT
Tumbling Speed 50 rpm
Exhaust Connection 4in dia.
Overall Dimensions W D H: 27 1/8 x 31 3/4 x 77 1/2 in
Overall Dimensions W D H: 686 x 807 x 1968 mm
Approximate Net Weight 176 lbs
CROSSOVER StaCkEd dRyER/dRyER
866.580.1010 ü laundrylux.com
Laundrylux • 461 Doughty Blvd., Inwood, NY 11096
Sales and Administration Tel: 516-371-4400 • Fax: 516-371-4204 • sales@laundrylux.com
Spare Parts Tel: 516-371-2000 • Fax: 516-371-4029 • parts@laundrylux.com
Technical Support – Tel: 516-371-0700 • Fax: 516-371-4029 • service@laundrylux.com
En Mexico: Llame gratis a este numero 001-800-010-1010
Laundrylux offers a complete line of
Electrolux Professional and Wascomat
Commercial Laundry equipment.
Refer installation and servicing to qualied, licensed personnel. Always read
Installation and Operating Manuals and consult local codes before installation.
Protect machines with properly rated circuit breakers ONLY. Warranty void if not
properly installed. Specications subject to change without notice. Laundrylux
assumes no responsibility for errors or omissions in this information.
Crossover Stacked Dryer, Coin 096546
3/8” M.N.P.T
Gas Inlet Connection
4” (10.16mm)
Exhaust Connection
41 3/4”
(106.1mm)
3 13/16”
(9.7mm)
2 1/16”
(5.3mm)
3 15/16”
(9.9mm)
1 13/16”
(4.5mm)
39 11/16”
(100.9mm)