How to Guide

[e-mail]
Installation & Maintenance
Playground & Modern Nostalgia
Applications
Concrete/masonry and cement backer board can be used for interior walls in wet or
dry applications. Gypsum board may be used for interior dry walls. A 3/16” V-Notch
trowel should be used with either white latex-modified thin set (per ANSI Standard
118.4) or Type 1 white organic mastic (ANSI Standard 136.1).
Installation
Crossville recommends using unsanded grout and a minimum 1/16” grout joint. This
narrow grout joint will not tolerate sanded grouts; which may also cause scratching
of the tiles’ finish. If a larger grout joint, along with a sanded grout, is desired, we
recommend the use of a soft rubber wall float to lessen the possibility of scratching the
tile’s finish. The gloss finish in darker colors is more susceptible to scratching.
After installation, we recommend the tile be cleaned with a commonly accepted neutral
cleaner. There are many such products. Two examples are Aqua Mix Concentrated Tile
Cleaner or TEC Everyday. A white nylon scrub pad or cheese cloth is good for wiping
off initial heavy film. Finish with a clean grout sponge or slightly damp terry cloth towel,
preferably white, as dyes may transfer to the grout joint.t.
Maintenance
Regular cleaning is the best way to keep Playground and Modern Nostalgia tile looking
good for years to come. Use clean, hot water (combined with a non-abrasive household
cleaner, if needed). Rinse thoroughly and dry with a soft microfiber cloth to prevent
spots. No waxes or sealers are needed.