Installation Guide

Porcelain Stone
®
ChromaColor
lowes@crossvilleinc.com
Shade & Texture Index
ChromaColor has a shade variation of V3.
V2 V3 V4V1
V1 Uniform appearance
V2 Slight Variation
V3 Moderate Variation
V4 Substantial Variation
This porcelain tile product is produced with a V3 variation. Expect that the amount
of color and texture on each piece may vary significantly. Inspect the product upon
delivery and for best results, blend tile from several cartons during installation.
Mosaics
Available in all colors
Nominal (in) Actual (in) Thickness (in) Finish
3 x 3 Mosaic 2-7/8 x 2-7/8 1 /4 Unpolished
*3 x 3 Mosaic Tile in 11-7/8 x 11-7/8 sheets with 1/8 inch grout joints
Sizes (shown in Chardonnay) Sizes and Finishes
ChromaColor is recommended for interior floors, walls, counter tops and exterior
walls in both residential and commercial applications. If an offset pattern is
required for tiles 18 inches or longer, Crossville recommends an offset of
not greater than 33%.
This Crossville porcelain tile includes a proprietary surface finish that imparts
a subtle glow, enhancing the color of the tile and allowing many stains and scuff
marks to be easily wiped off the surface. This extraordinary finish helps keep
your living areas looking their best.
Recommended Uses
Easy-Clean Surface
4 x 12 Single 6 x 12 Cove Base
Bullnose (universal flat top)
18 x 18
12 x 12
3 x 3 Mosaic
12 x 24
6 x 6
Field Tile
Available in all colors
Nominal (in) Actual (in) Thickness (in) Finish
6 x 6 5-13/16 x 5-13/16 3/8 Unpolished
12 x 12 11-13/16 x 11-13/16 3/8 Unpolished
18 x 18 17-13/16 x 17-13/16 3/8 Unpolished
12 x 24 11-13/16 x 23-13/16 3/8 Unpolished
A grout joint of 3/16 to 1/4 inch.
Product Performance
Breaking Strength >450 lbf ASTM C648
Bond Strength >200 psi ASTM C482
Chemical Resistance Unaffected ASTM C650
Frost Resistance Resistant ASTM C1026
Water Absorption <0.10% ASTM C373
Scratch Hardness 6 Mohs Scale
Wet Dynamic COF
Unpolished .42 – .52 DCOF AcuTest™
Coordinating Trim
Nominal (in) Actual (in) Thickness (in) Finish
4 x 12 Single Bullnose 3-3/4 x 11-3/4 3/8 Unpolished
6 x 12 Cove Base 5-7/8 x 11-3/4 3/8 Unpolished

Summary of content (2 pages)