Installation Guide
Porcelain Stone
®
EnGarde
lowes@crossvilleinc.com
Field Tile
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
6 x 24 147 x 597 10.5 Unpolished
12 x 24 297 x 597 10.5 Unpolished
24 x 24 597 x 597 10.5 Unpolished
A minimum grout joint of 3mm is recommended.
Product Performance
Breaking Strength >500 lbf ASTM C648
Bond Strength >200 psi ASTM C482
Chemical Resistance Unaffected ASTM C650
Frost Resistance Resistant ASTM C1026
Water Absorption <0.20% ASTM C373
Scratch Hardness 7 Mohs Scale
Wet Dynamic Coefficient of Friction Range
Unpolished 0.42 - 0.52 AcuTest
sm
Shade & Texture Index
EnGarde has a shade variation of V3.
V2 V3 V4V1
V1 Uniform appearance
V2 Slight Variation
V3 Moderate Variation
V4 Substantial Variation
This porcelain tile product is produced with a V3 variation. Expect that the amount
of color and texture on each piece may vary significantly. Inspect the product upon
delivery and for best results, blend tile from several cartons during installation.
Mosaics
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
2 x 2* 47 x 47 10.5 Unpolished
*Mounted on a 297 x 297 sheets with a 3mm grout joint. The 2 x 12 mosaic can be used in linear drain
shower pans as long as the 12 inch side runs parallel to the drain.
Coordinating Trim
Available in all colors
Nominal (in) Actual (mm) Thickness (mm)
Finish
6 x 24 Bullnose 147 x 597 10.5 Unpolished
Sizes (shown in Charcoal) Sizes and Finishes
EnGarde is recommended for interior floors, walls, counter tops and exterior walls in both
residential and commercial applications. If an offset pattern is required for tiles 18
inches or longer, Crossville recommends an offset of not greater than 33%.
This Crossville porcelain tile includes a proprietary surface finish that imparts a subtle
glow, enhancing the color of the tile and allowing many stains and scuff marks to be
easily wiped off the surface. This extraordinary finish helps keep your living areas
looking their best.
Recommended Uses
Easy-Clean Surface
2 x 12 Mosaics available
in Unpolished. (Mounted on
a 297 mm x 297 mm sheet.)
24 x 24
12 x 24
6 x 24
Specifications
Our Porcelain Stone
®
products
are available in popular plank
shapes with no minimum order
and quick fulfillment.
See website
for more
details and
sizes.
Get Planked!
Sizes
Available in all colors
Mosaics
Available in all colors
2 x 12 Mosaics available
in UPS. (Mounted on a
297 mm x 297 mm sheet.)
Sizes & Finishes
Field Tile
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
6 x 24 147 x 597 10.5 UPS
12 x 24 297 x 597 10.5 UPS
24 x 24 597 x 597 10.5 UPS
Wet Dynamic Coefficient of Friction Range
UPS 0.42 - 0.52 AcuTest
sm
Product Performance
Breaking Strength >500 lbf ASTM C648
Bond Strength >200 psi ASTM C482
Chemical Resistance Unaffected ASTM C650
Frost Resistance Resistant ASTM C1026
Water Absorption <0.20% ASTM C373
Scratch Hardness 7 Mohs Scale
Note: All field tile is rectified and modular with a minimum 3mm grout joint.
Actual measurements stated in inches indicate tile is calibrated (non-rectified).
Actual measurements stated in mm indicated tile is rectified.
Please Note: Tile is directional. Please install accordingly.
Shade & Texture Index
Altered State has a shade variation of V3.
This porcelain tile product is produced with a V3 variation. Expect that the amount of color and texture
on each piece may vary significantly. Inspect the product upon delivery and for best results, blend tile
from several cartons during installation.
V2 V3 V4
V1
V1 Uniform Appearance
V2 Slight Variation
V3 Moderate Variation
V4 Substantial Variation
Coordinating Trim
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
6 x 24 Single Bullnose 147 x 597 10.5 UPS
6 x 24 Single Bullnose
Mosaics
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
2 x 12* 47 x 297 10.5 UPS
* Sheet mounted on 297 x 297 with 3mm grout joint.
24 x 24
12 x 24
6 x 24
6 x 24 Single Bullnose
Copper 6 x 24 and 24 x 24