Data Sheet

24 VDC / 24 VAC / 48 VAC / 120 VAC / 220 VAC EIH Part number 84871034
Current transformer fitted by passing a cable through the front
AC current treshold adjustable from 1 to 20 A AC (30 Hz to 400 Hz) via button on front
Relay output 5 A - 250 V AC - 1 N/O contact
Multivoltage power supply : 100 to 230 V AC 50-60 Hz
24 V AC / DC
Part numbers
Specifications
Type
Measurement range
Supply voltage
84 871 034
EIH
0,1→10A
230 V AC
Supply
Supply voltage Un
24 VDC / 24 VAC / 48 VAC / 120 VAC / 220 VAC
Voltage supply tolerance
- 15 % / +15 % limited to -15 % / +10 % if products are mounted without space between them
Operating range
0.85→1.15Un
Power consumption at Un
3 VA AC 1 W DC
Immunity from micro power cuts
10 ms
Inputs and measuring circuit
Frequency of measured signal
40→500Hz
Threshold adjustment
10→100%ofthemeasurementrange
Adjustable hysteresis
5→50%ofthedisplayedthreshold
Display precision
± 10 %
Repetition accuracy with constant parameters
± 0.1 %
Measuring error with voltage drift
± 0,1 % ( ± 10 % Un)
Measuring error with temperature drift
± 0,02 %
Timing
Delays on power up (Ti)
0.1s→20s ± 10 %
Delay on thresold crossing Tt
0.1s→3s ± 10 %
Repetition accuracy with constant parameters
± 0.1 %
Reset time
500 ms
Delay on pick -up
500 ms
Output
Type of output
1 changeover AgNi, 8A AC max
Type of contacts
No cadmium
Maximum breaking voltage
250 V AC/DC
Max. breaking current
8 AAC max.
Min. breaking current
100 mA AC/DC
Electrical life (number of operations)
AC 12 : 2000 VA - 10
5
AC 15 : Cos φ = 0,3 - 6 000
DC 13 : L/R = 300 ms - 6 000
Breaking capacity (V resistive)
2000 VA AC
Maximum rate
360 operations/hour at full load
Operating categories acc. to IEC/EN 60947 -5-1
AC12, AC15, DC13
Mechanical life (operations)
5 x 10
6
Insulation
Insulation coordination (IEC/EN 60664 -1)
Overvoltage category III : degree of pollution 2
Rated impulse withstand voltage (IEC/EN 60664 -1)
4 KV (1,2 / 50 μ s)
Dielectric strength (IEC/EN 60664 -1)
2,5 KV AC 50 Hz 1 min.
Insulation resistance (IEC/EN 60664 -1)
> 100 M Ω / 500 VDC
General characteristics
Display power supply
Green LED
Display relay
Yellow LED
Casing
22,5 mm
Mounting
On 35 mm symmetrical DIN rail, IEC/EN 60715
Mounting position
All positions
Material : enclosure plastic type VO to UL94 standard
Enclosure plastic type VO to UL94 standard
Protection (IEC/EN 60529)
Terminal block : IP 20
Casing : IP 50
Weight
140 g
Connecting capacity IEC/EN 60947 -1
Rigid : 1 x 4
2
- 2 x 2.5
2
mm
2
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com