Datasheet

›
MLR1
›
Timers
›
DIN rail mount
›
17.5 mm - 1 Relay 8A
›
Multi-function or mono-function
›
Multi-range
›
Multi-voltage
›
Screw or spring terminals
›
LED status indicator (relay version)
›
Possibility of external load connection in parallel
to the control input
›
3-wire PNP sensor compatible
Specications
Functions Timing Output Nominal rating Connections Supply voltage Code
L - Li 0,1 s →100 h 1 changeover
relay
8 A Screw terminals 24 V DC / 24
→240 V AC
88827155
Timing
Timing ranges (7 ranges) 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h
Repetition accuracy with constant parameters ± 0.5 % (IEC/EN 61812-1)
Drift Temperature ± 0,05 % / °C
Drift Voltage ± 0,2 % / V
Display accuracy according to IEC/EN 61812-1 ± 10 % / 25 °C
Immunity from micro power cuts : typical < 10 ms
Minimum pulse duration typically (relay version) 30 ms
Minimum pulse duration typically (solid state version) 50 ms
Minimum pulse duration typically (relay version under load) 100 ms
Maximum reset time by de-energisation typically (relay version) 120 ms
Maximum reset time by de-energisation typically (solid state version) 350 ms
Supply
Multi-voltage power supply Depending on version
Frequency (Hz) 50 / 60
Operating factor 100 %
Operating range
85 →110 % Un
85 →120 % Un for 12 V AC / DC
Max. absorbed power
32 VA (240 VAC)
1,5 W (240 VDC)
0,6 W (24 VDC)
0,7 VA (12 VAC)
0,7 W (12 VDC)
Output specication
Rated power 2000 VA/80 W