Data Sheet

ManualsBrandsCrouzet ManualsAutomationPLC controller Crouzet Nano PLC 88982213 24 V DC

 11/2018

›

Logic Controller em4 expansion

EM4EA

Analog expansion E10A

› Up to two same or different expansions can be added to

the base station to expand up to 46 I/OS

› 6digital/analogconfigurableinputs(0-10V,0-20mA,



4-20mA)withagoodaccuracyforindustrialsensors

› 4outputs(2xDigital/PWMand2x0-10V)allowing



controllinganalogactuators(controlledvalve,

controlledpump...)

Analog expansion E10A

Speciccharacteristics

Reference 88982213

Finish Glossy black

On front panel color Black RAL 9011

On terminal block color Blue RAL 5017

Protection rating

(in accordance with IEC/EN 60529)

IP 40 on front panel

IP 20 on terminal block

Weight Without packing: 105 g

With packing: 145 g

Dimensions Without packing: 60.4 x 90 x 60.3 mm / 2.37 x 3.54 x 2.37 inch

With packing: 93 x 103 x 65 mm / 3.66 x 4.06 x 2.56 inch

General characteristics

Products certication CE, cULus Listed

Conformity with the low voltage directive

(in accordance with BT 2006/95/EC)

IEC/EN 61131-2 (Open equipment)

Conformity with the EMC directive

(in accordance with 2004/108/EC)

IEC/EN 61000-6-1 (Residential, commercial and light-industrial environments)

IEC/EN 61000-6-2 (Industrial)

IEC/EN 61000-6-3 (Residential, commercial and light-industrial environments)

IEC/EN 61000-6-4 (Industrial)

Earthing None

Overvoltage category 3 in accordance with IEC/EN 60664-1

Pollution Degree: 2 in accordance with IEC/EN 61131-2

Maximum utilization altitude Operation: 2000 m

Transport: 3000 m

Mechanical resistance Immunity to vibrations IEC/EN 60068-2-6, Fc test

Immunity to shock IEC/EN 60068-2-27, Ea test

Resistance to electrostatic discharge Immunity to ESD IEC/EN 61000-4-2, level 3

Resistance to HF interference

(Immunity)

Immunity to radiated electrostatic elds IEC/EN 61000-4-3, level 3

Immunity to fast transients (burst immunity) IEC/EN 61000-4-4, level 3

Immunity to shock waves IEC/EN 61000-4-5

Radio frequency in common mode IEC/EN 61000-4-6, level 3

Conducted and radiated emissions

(in accordance with EN 55022/11 group 1)

Class B

Operation temperature -20 °C (-4 °F) → +60 °C (140 °F) (+40 °C (104 °F) in a non-ventilated

enclosure)

Storage temperature -40 °C (-40 °F) → +80 °C (176 °F)

Relative humidity 95% max. (no condensation or dripping water)

Summary of content (5 pages)

PAGE 1
| | 11/2018 ›› Logic Controller em4 expansion EM4EA Analog expansion E10A ›› Up to two same or different expansions can be added to › › the base station to expand up to 46 I/OS 6 digital/analog configurable inputs (0-10 V, 0-20 mA, 4-20 mA) with a good accuracy for industrial sensors 4 outputs (2x Digital/PWM and 2x 0-10 V) allowing controlling analog actuators (controlled valve, controlled pump...
PAGE 2
| | AUTOMATION.CROUZET.COM || 2 Screw terminals connection capacity | | Logic Controller em4 expansion | | 11/2018 Flexible wire with ferrule: 1 conductor: 0.2 to 2.5 mm², AWG 24-14 Flexible wire with ferrule: 2 conductors: 0.2 to 0.75 mm², AWG 24-18 Rigid wire: 1 conductor: 0.2 to 2.5 mm², AWG 24-14 Rigid wire: 2 conductors: 0.2 to 0.75 mm², AWG 24-18 Tightening torque: 0.5 N.m (4.5 lb-in) (tighten using screwdriver diam. 3.
PAGE 3
| | AUTOMATION.CROUZET.COM || 3 | | Logic Controller em4 expansion Conversion time Controller cycle time Maximum error at 25 °C (77 °F) ± 1.2 % of full scale Maximum error at 55 °C (131 °F) ± 1.7 % of full scale Repeat accuracy at 55 °C (131 °F) ± 0.5 % Isolation between analogue channel and power supply None Protection against polarity inversions Yes Overvoltage protection Yes | | 11/2018 If the input voltage is > 7 V, this one is automatically switched on 0-10V configuration.
PAGE 4
| | AUTOMATION.CROUZET.COM || 4 | | Logic Controller em4 expansion | | 11/2018 Response time ≤ 300 ms Maximum error at 25 °C (77 °F) ± 1 % of full scale Maximum error at 55 °C (131 °F) ± 1.
PAGE 5
| | AUTOMATION.CROUZET.COM || 5 O3 & O4 | | Logic Controller em4 expansion | | 11/2018 0-10 V 10 V 0 On E10A (3) C1 O1 O2 O3 0V O4 0V 10 m Max 393.7 inches Max 0V Inductive load I/O installations I1 I2 I3 I4 I5 I6 C1 O1 O2 O3 0V O4 0V Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warrantly or any form of contractual commitment.