Data Sheet

41
Max. breaking voltage
5 ➞ 30 V
c
24
➞ 250 V
a
Breaking current CB-CD-XD10-XB10-XR06-XR10: 8 A
XD26-XB26: 8 x 8 A relay, 2 x 5 A relay
XE10: 4 x 5 A relay
XR14: 4 x 8 A relay, 2 x 5 A relay
Electrical durability for 500 000 operating cycles Utilization category DC-12: 24 V, 1.5 A
Utilization category DC-13: 24 V (L/R = 10 ms), 0.6 A
Utilization category AC-12: 230 V, 1.5 A
Utilization category AC-15: 230 V, 0.9 A
Max. Output Common Current 12 A for O8, O9, OA
Minimum switching capacity 10 mA (at minimum voltage of 12 V)
Minimum load 12 V, 10 mA
Maximum rate Off load: 10 Hz
At operating current: 0.1 Hz
Mechanical life 10.000.000 (operations)
Voltage for withstanding shocks In accordance with IEC/EN 60947-1 and IEC/EN 60664-1: 4 kV
Response time Make 10 ms
Release 5 ms
Built-in protections Against short-circuits: None
Against overvoltages and overloads: None
Status indicator On LCD screen for CD and XD
Supply
12 V
c
24 V
c
Nominal voltage
12 V
c
24 V
c
Operating limits -13 % / +20 %
or 10.4 V c ➞ 14.4 V c
(including ripple)
-20 % / +25 %
or 19.2 V
c
➞ 30 V
c
(including ripple)
Immunity from micro power cuts 1 ms (repetition 20 times) 1 ms (repetition 20 times)
Max. absorbed power CB12 with solid state outputs: 1.5 W
CD12: 1.5 W
CD20: 2.5 W
XD26-XB26: 3 W
XD26-XB26 with extension: 5 W
XD26 with solid state outputs: 2.5 W
CB12-CD12-CD20 with solid state
outputs - XD10-XB10 with solid state
outputs: 3 W
XD10-XB10 with relay outputs: 4 W
XD26-XB26 with solid state outputs: 5 W
CB20-CD20 with relay outputs: 6 W
XD26 with relay outputs: 6 W
XD10-XB10 with extension: 8 W
XD26-XB26 with extension: 10 W
Protection against polarity inversions Yes Yes
Digital inputs (I1 to IA and IH to IY)
12 V
c
24 V
c
Input voltage
12 V
c
(-13 % / +20 %) 24 V
c
(-20 % / +25 %)
Input current
3.9 mA @ 10.44 V
c
4.4 mA @ 12.0 V
c
5.3 mA @ 14.4 V
c
2.6 mA @ 19.2 V
c
3.2 mA @ 24 V
c
4.0 mA @ 30.0 V
c
Input impedance 2.7 k 7.4 k
Logic 1 voltage threshold
 7 V
c
 15 V
c
Making current at logic state 1  2mA  2.2 mA
Logic 0 voltage threshold
 3 V
c
 5 V
c
Release current at logic state 0 < 0.9 mA < 0.75 mA
Response time 1 ➞ 2 cycle times + 6 ms 1 ➞ 2 cycle times + 6 ms
Maximum counting frequency
- Inputs I1 & I2: FBD (up to 6 kHz)
& Ladder (1 kHz)
- Inputs I3 to IA & IH to IY: In
accordance with cycle time
(Tc) and input response
time (Tr): 1/ ( (2 x Tc) + Tr)
- Inputs I1 & I2: FBD (up to 6 kHz)
& Ladder (1 kHz)
- Inputs I3 to IA & IH to IY: In
accordance with cycle time
(Tc) and input response
time (Tr): 1/ ( (2 x Tc) + Tr)
Sensor type Contact or 3-wire PNP Contact or 3-wire PNP
Conforming to IEC/EN 61131-2 Type 1 Type 1
Input type Resistive Resistive
Isolation between power supply and inputs None None
Isolation between inputs None None
Protection against polarity inversions Yes Yes
Status indicator On LCD screen for CD and XD On LCD screen for CD and XD
Characteristics of relay outputs common to the entire range
Characteristics of product with DC power supplied
123-UK_lpr_Millenium 3 Smart_3718.fm Page 41 Jeudi, 5. décembre 2013 2:18 14