Data Sheet

44
Modular power supplies
Switch mode power supply regulated and protected
against overloads and short-circuits, easy to integrate
into switchboards and enclosures
The potentiometer can be used to set the output
voltage between 100 and 120 % (24 V
c
versions) to
compensate for any voltage drops on the line
The LED continuously signals the presence of voltage
at the output and, when flashing, triggering of the self-
protection
Broad range of supply voltage
Double insulation
7.5 W
30 W
60 W
Type Nominal output voltage Nominal power Nominal output current Code
PS
5 V
c
(4.75 V
6.25 V)
20 W 4 A
88950305
12 V
c
(11.4 V
15 V)
25 W 2.1 A 88950306
24 V
c
(22.8 V 28.8 V)
7.5 W 0.3 A 88950303
24 V
c
(22.8 V
28.8 V)
15 W 0.6 A
88950304
24 V
c
(22.8 V 28.8 V)
30 W 1.2 A
88950307
24 V
c
(22.8 V
28.8 V)
60 W 2.5 A 88950302
Environmental characteristics
Conformity to standards IEC/EN 60950-1
IEC/EN 61000-6-2
IEC/EN 61000-6-3
IEC/EN 61204-3
IEC/EN 60364-4-41 – SELV: Safety Extra Low Voltage
EN 55022 (CISPR22)
Certifications CE, UL, CSA, TüV
Emission Harmonic: IEC/EN 61000-3-2
Operating temperature -25 +55 °C
Storage temperature (°C) -40 +70 °C
Protection class Class 2 (Double insulation)
Electrical characteristics
Input voltage
100 240 V
a
single-phase (-15 %/+10 %)
Supply frequency range 50/60 Hz (+4 % / -6 %)
or 47 53 Hz/57 63 Hz
Output voltage Adjustable from 100 120 %
Peak current on energisation < 20 A (Except for 88950302: < 90 A during 1 ms)
Regulation of line and load ± 3 %
Immunity from micro power cuts
< 10 ms (100 V
a
)
< 150 ms (230 V
a
)
Thermal protection Yes
Technology Primary switch mode electronic power supplies
Short-circuit protection Yes
Overload protection Yes
Primary protection Fuse gG 2 A or circuit breaker 2 A curve D for 88950303, 88950304,
88950305, 88950306, 88950307
Fuse gG 3 A or circuit breaker 3 A curve D for 88950302
Reset after overload Automatic
Dielectric strength Input/output 3000 VAC/50 Hz/1 mn
Status indication LED at the output
Mechanical characteristics
Mounting On section, 35 x 7. 5 mm and 35 x 15 mm or on panel (2 x Ø4 mm)
Screw terminals connection capacity
Input connection 2 x 0.14 2.5 mm
2
(AWG 26 AWG 14)
Output connection 1 x 0.14 2.5 mm
2
(AWG 26 AWG 14)
Millenium 3 accessories
Part numbers
General characteristics
145-UK_Millenium 3 accessories_Millenium power supply_6830.fm Page 44 Jeudi, 5. décembre 2013 2:25 14
See our NEW Power Suply Family HERE