Datasheet

ManualsBrandsCrouzet ManualsAutomationTime Lag Relay Multifunction

35 mm

2 Relays 8A PU2R3 Part number 88867303

Multi

-function or mono-function

Multi

-range

Multi

-voltage

Relay output 1 or 2 : 8 A - 250 V (10 A UL)

LED status indicator

Option of connecting an external power supply to the control input

3-wire sensor control option

Part numbers

Specifications

Type

Functions

Timing

Output

Nominal rating

Connections

Supply voltage

88 867 303

PU2R3

A - At -

- Ac - Bw

0,1s→100h

2 timed changeover relays

8 A

11-

12→240VAC/DC

Timing

Timing ranges (7 ranges)

1 s - 10 s -

1 min

10 min

- 1 h - 10 h - 100 h

TK2R1 : 0.6s

- 2.5s - 20s - 160 s

Repetition accuracy with constant parameters

0.5 % (IEC/EN 1812

-1)

Drift Temperature

0,05 % / °C

Drift Voltage

0.2 % / V

Display accuracy according to IEC/EN 61812

-1

10 % / 25 °C

Minimum pulse duration typically (relay version)

30 ms

Minimum pulse duration typically (solid state version)

50 ms

Minimum pulse duration typically (relay version under

load)

100 ms

Maximum reset time by de

-energisation typically (relay

version)

100 ms

Maximum reset time by de

-energisation typically (solid

state version)

350 ms

Immunity from micro power cuts : typical

> 10 ms

Supply

*** TRADUCTION MANQUANTE ***

Multi

-voltage power supply

Depending on version

Frequency (Hz)

50 / 60

Operating range

85 to 110 % Un

(85 to 120 % Un for 12V AC/DC)

Operating factor

100 %

Max. absorbed power

0,6 W 24 V AC/DC

1,5 W 230 V AC

32 VA 230 V AC

Output specification

1 or 2 changeover relays, AgNi (cadmium-free)

2000 VA/80 W

Rated power

2000 VA/80 W

Maximum breaking current

8 A AC 8A DC

Minimum breaking current

10 mA / 5 V DC

Voltage breaking capacity

250 V AC/ DC

Electrical life (operations)

operations 8 A 250 V resistive

Mechanical life (operations)

5x10

Breakdown voltage acc. to IEC/EN 61812

-1

2.5 kV /1 min / 1 mA / 50 Hz

Impulse voltage acc. to IEC/EN 60664

1, IEC/EN 61812

-1

5 kV, wave 1.2 / 50

Solid state output

Rated power

0,7 A AC/DC

20 °C (0,5 A UL)

Derating

5 mA / °C

Maximum admissible current

20A≤10ms

Minimum breaking current

10 mA

Leakage current

< 5 mA

Voltage breaking capacity

250 V AC/ DC

Maximum voltage drop at terminals

3 wire 4V - 2 wire 8V

Electrical life (operations)

Mechanical life (operations)

Breakdown voltage acc. to

IEC/EN 60664

1, IEC/EN

60255-5

2.5 kV to 1 mA / 1 min

Input type

Volt-free contact

3-wire PNP output control option residual voltage : 0.4V whatever the timer power supply

General characteristics

Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected

04/12/2014 www.crouzet.com

Summary of content (6 pages)

PAGE 1
04/12/2014 www.crouzet.
PAGE 2
04/12/2014 Conformity to standards www.crouzet.com IEC/EN 61812-1 IEC/EN 61000-6-1 IEC/EN 61000-6-2 IEC/EN 61000-6-3 IEC/EN 61000-6-4 CE, UL, cUL, CSA, GL -20 →+60 -30 →+60 Certifications Temperature limits use (°C) Temperature limits stored (°C) Installation category Voltage surge category (acc. to IEC/EN 60664-1) Creepage distance and clearance acc. to IEC/EN 60664-1 4 kV / 3 Protection (IEC/EN 60529) IP 20 IP 40 Degree of protection acc.
PAGE 3
04/12/2014 Dimensions (mm) Accessories Curves Function A Function A Delay on energisation 2 timers or 2 relays, including 1 instantaneous Curves Function Ac Function Ac Timing after closing and opening of control contact 2 timers or 2 relays, including 1 instantaneous Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected www.crouzet.
PAGE 4
04/12/2014 Curves Function At Function At Timing on energisation with memory 2 timers or 2 relays, including 1 instantaneous Curves Function B Function B Timing on impulse one shot 2 timers or 2 relays, including 1 instantaneous Curves Function Bw Function Bw Pulse output (adjustable) 2 timers or 2 relays, including 1 instantaneous Curves Function C Function C Timing after impulse 2 timers or 2 relays, including 1 instantaneous Unless otherwise specified, the characteristics given are applicable to
PAGE 5
04/12/2014 Curves Function D Function D Flip-flop Pause start 2 timers or 2 relays, including 1 instantaneous Curves Function Di Function Di Flip-flop Pause Start 2 timers or 2 relays, including 1 instantaneous Curves Function H Function H Timing on energisation 2 timers or 2 relays, including 1 instantaneous Curves Function Ht Function Ht Delay on energisation with memory 2 timers or 2 relays, including 1 instantaneous Connections 11-pin 2 relay outputs Unless otherwise specified, the characterist
PAGE 6
04/12/2014 Functions Functions A - At / H - Ht / B / C / Di - D / Ac / Bw Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected www.crouzet.