User's Manual

DriveCore Install Network Series Power Amplifiers
page 21
Operation Manual
Set-up and System Conguration
Cascading Inputs
Cascading the analog inputs, or "Y-ing channels", gives more flexibility to the installation of this amplifier (See Figure 15). One input can be used to drive some or all of the
amplifier outputs. NOTE: By cascading the inputs, the corresponding input DSP functions for individual channels will be removed and only the output DSP functions will be
available (See Figure 16).
Figure 15 Use the "Y 1+2" etc. check boxes to cascade channel inputs
Figure 16 With the "Y 1+2" box checked, both output Ch.1 and Ch.2 are fed by input Ch.1 and input processing is organized accordingly.