Owner manual

Page 4
Reference Manual
P.I.P.-RPA
Fig. 2.1 Facilities
2 Facilities
A. Input Mode Switches
These gold-plated three-position
switches select the mode of each
main audio input: mic-level, line-level,
or mic-level with phantom power.
B. Input Level Controls
The level of each main audio input
can be adjusted with these level con-
trols. They have a range of 36 dB.
Using them, you can compensate for
a wide range of input signal levels.
C. Barrier Connectors
All connections are made using these
screw-down barrier-block connec-
tors.
Important: Do not use stranded wire
unless the wire ends are first tinned.
Strip no more than
1
/
4
inch (6.4 mm)
of insulation from the wire ends.