Crown Mega-Stor 2 Installation Manual

3
FOLLOW ALL INSTRUCTIONS and warnings
printed in this manual and posted on the indirect
water heater.
MAINTAIN THIS PRODUCT. To keep your indirect
water heater safe and reliable, have a service
technician maintain it as specified in this manual.
IF YOU ARE NOT QUALIFIED to install or service
boilers and water heaters, do not install or service
this one.
THIS INDIRECT WATER HEATER MAY LEAK
WATER at the end of its useful life. Be sure to
protect walls, carpets, and valuables from water
that could leak from the indirect water heater.
PROTECT YOUR HOME IN FREEZING
WEATHER. A power outage, safety lockout, or
component failure will prevent your boiler from
lighting. In winter, your pipes or this indirect
water heater may freeze and cause extensive
property damage. Do not leave the heating system
unattended during cold weather unless alarms
or other safeguards are in place to prevent such
damage.
WARNINGS FOR THE HOMEOWNER
83.50
3
158.75
216.50
DANGER
BURN
HOT
!
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF
Products, 5th Edition.
EXCEPT WHERE SHOWN OTHERWISE.
D
C
B
A
B
C
D
1
2
3
4
5
6
78
8
7
65
4
3
2
1
PART NUMBER 980014
can cause severe burns
Feel water before bathing or
Danger/Scald Label
available, see manual.
Children, disabled and elderly
CAUTION LABEL
0.10"
limited to a maximum of 30 psi by an
CROWN BOILER COMPANY IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
CHANGE CBC TO VBW, CHANGED WORDING OF
UNLESS OTHERWISE SPECIFIED:
in Clinical Toxicology of Commercial
heater.
See instruction manual before
0.03"
Temperature limiting valves are
Water temperature over 125°F
THREE PLACE DECIMAL
scalded.
setting temperature at water
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
are at highest risk of being
showering.
* The boiler water pressure must be
3. LETTERING TO BE BLACK BOLD FACED.
PROPERTY OF CROWN BOILER COMPANY. ANY REPRODUCTION
approved safety or relief valve.
0.005"
MATERIAL
Noted
DRAWN
ENG APPR.
DATE
NAME
SIZE
B
DWG. NO. REV
JP
--
10-22-10
Sheet1 of 1
MS-002
DO NOT SCALE DRAWING
B
A Added Part Number
JP 10-5-11
BY DATE
B
instantly or death from scalds.
PHILADELPHIA, PA 19134
TWO PLACE DECIMAL
12-17-15
DESCRIPTIONREV
VELOCITY BOILER WORKS
JP
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32"
ANGULAR: BEND 1°
ONE PLACE DECIMAL
* The heat-transfer medium must be
water or other nontoxic fluid having a
toxicity rating or Class of 1, as listed
NOTES:
1. MAT'L: ANSI/UL 969 CERTIFIED LABEL SYSTEM.
2. LETTERING BLACK ON WHITE BACKGROUND
CAUTION