Operating instructions

3) The Maxi-Therm may be located some distance from the boiler provided the zone system is designed to
provide the flow called for in Table 1 through the coil. Also, the further the Maxi-Therm is from the
boiler, the longer the response of the boiler will be to a call from the Maxi-Therm zone. If long runs
exist between the boiler and Maxi-Therm, it is advisable to insulate the piping.
19
MODEL "X" "Y"
MT040G 0 12*
MT050G 0 12*
MT079G 24 18
MT100G 24 22
* Additional clearance may be
required for hot water piping
Figure 5: Required Access Clearances