C Specifications PE 4000 Series End Control Pallet Truck PE 4000 Series
C PE 4000 Series Option 1 – 37.06" Option 2 – 33.75" End Control Pallet Truck 9" 90° 9.12" 36" 16 7.3" 11 15 10" 16 23.3" – 84" Forks 32.6" – 93" Forks 35.3" – 96" Forks 22.0" – 84" Forks 31.3" – 93" Forks 34.0" – 96" Forks 4.5" 9.75" 6" 9.88" 9.25" Battery roller to floor 6.06", forks lowered 4.5" 3.75" 14 13 10 11 12 3.
Specifications Dimensions General Info PE 4000 Series 1 Manufacturer 2 Model 3 Load Capacity 4 Power Electric 5 Operator Type Stand-up 8 Lift Height 9 Crown Equipment Corporation PE 4000 lb 6000/8000 24 Volts Walk/Ride in in 6 10 Head Length Option 1/Option 2 in 36.7/43.2 16 Outside Fork Spread Standard Tip in 22/27 Extended Tip in 23/28 Speed Travel Power Unit First Performance 17 Lift 9.25 mph 8.6 5.5 4000 lb mph 7.0 5.2 6000 lb mph 6.3 5.
Maximum Battery Size Option 1 - 6.69" wide x 34.44" long x 31.62" high Option 2 - 13.19" wide x 31.12" long x 31.62" high Batteries Option 1 - 24-volt, 330 amp hour, 7.7 Kwh Min/Max weight 360/900 lb Option 2 - 24-volt, 930 amp hour, 21.5 Kwh Min/Max weight 975/1500 lb Standard Equipment 1. 24-volt fused electrical system 2. Model 1404C Crown separately excited control 3. InfoPoint™ - Quick reference guide and maps support diagnostics 4. Polyurethane load wheels 5.
Drive Unit All gear drive from drive motor to drive wheel axle. Drive tire axle is mounted in the drive unit on both sides for maximum strength in rough floor or docking applications. Drive unit is top and bottom mounted. Top mount is a large, tapered roller bearing for vertical or horizontal forces. Bottom mount has four shock mounted rollers on drive unit running in a hardened steel roller race. Gear train runs in oil-filled, sealed housing.
C Crown Equipment Corporation New Bremen, Ohio 45869 USA Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Momentum symbol, InfoPoint, Quick Coast and QuickPick are trademarks of Crown Equipment Corporation. Copyright 2003 Crown Equipment Corporation SF14291 Rev. 10/03 Printed in U.S.A.
