C Specifications ST 3000 Series SX 3000 Series Stackers ST/SX 3000 Series
C ST 3000 Series 34 Stackers 35 30 30 33 17 34 38 36" 17.2" 28 21 BRAKE 18 BRAKE OVERRIDE DRIVE 23 20 19 BRAKE 42.4% 1.57" 27 2.36" 31 7.5" 7 32 4" 12.
General Information ST 3000 Series 1 Manufacturer 2 Model Mast Type 3 Power 4 Operator Type 5 Load Capacity 6 Load Center 7 Wheelbase 8 Weight Less Battery 13 Wheel Size Front (d x w) Tires 14 Wheel Size Rear (d x w) 15 Additional Wheels Caster Wheel (d x w) 16 Wheels Number (x=driven) 17 Track Width 18 Lift Height 18a Capacity at Lift Height 19 Free Lift 20 Collapsed Height 21 Extended Height Performance Dimensions 22 23 24 25 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Battery 44 45 46 47
C SX 3000 Series 34 35 Stackers 30 30 33 17 34 38 47.3" 20" 28 21 BRAKE 18 BRAKE OVERRIDE DRIVE 23 20 BRAKE 19 42.4% 1.57" 27 2.36" 31 7.5" 7 32 4" 11.
General Information SX 3000 Series 1 Manufacturer 2 Model Mast Type 3 Power 4 Operator Type 5 Load Capacity 6 Load Center 7 Wheelbase 8 Weight Less Battery Tires 13 Wheel Size Front (d x w) 14 Wheel Size Rear (d x w) 15 Additional Wheels Caster Wheel (d x w) 16 Wheels Number (x=driven) 17 Track Width 18 Lift Height 18a Capacity at Lift Height** Battery Performance Dimensions 19 Free Lift 20 Collapsed Height 21 Extended Height 22 23 24 25 27 28 29 30 31 32 33 34 Load Backrest Size Tiller Arm Ht in D
Standard Equipment 1. 24 volt fused electrical system 2. MOSFET transistorized traction control system 3. Separately excited drive motor (SEM) 4. Wet-cell starter battery pack, four 6-volt batteries at 87 amp hour (ST) 5. Maintenance-free battery pack, four 6-volt batteries at 195 amp hour (SX) 6. 30 amp fully automatic charger 7. Electric brake 8. Brake override 9. Anti-roll down 10. Regenerative motor braking 11. Heavy-duty drive unit 12. Drive unit enclosed in high ductile strength steel frame 13.
Operator Controls The control hand grips are urethane covered for insulation from cold and vibration. Full function control handle includes travel direction, raise, lower and reversing switch. The physical efforts to hold the handle at a comfortable height was minimized to reduce fatigue a distinct advantage. The operator is positioned to maximize the steer effort and maintain excellent visibility.
C Crown Equipment Corporation New Bremen, Ohio 45869 USA Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Momentum symbol and Work Assist are trademarks of Crown Equipment Corporation. Copyright 2004 Crown Equipment Corporation SF14388 5/04 Printed in U.S.A.
