Owners Manual

Page 40 of 66
FIGURE 11A. VALVE POSITIONS GRILLS WITH LIGHT PACKAGE
Press down and hold the piezo ignition button (See “Figure 11”) to engage the electronic
ignition and light the pilot tube. Confirm that the pilot is lit by looking down through the
cooking grates. You will be able to feel heat coming up to the cooking surface also. (Do Not
touch the cooking grate while feeling for heat as the surface could cause burns)
• For appliances not equipped with a lighting package: Turn the pilot valve into the on
position. Press down and hold the electronic ignition button (See “Figure 12”) to engage the
electronic ignition and light the pilot tube. Confirm that the pilot is lit by looking down
through the cooking grates. You will be able to feel heat coming up to the cooking surface
also. (Do Not touch the cooking grate while feeling for heat as the surface could cause
burns)
• Once the pilot is lit, turn the main burner valves on to the desired temperature setting. (See
INDEX: “General Operating Procedures” for guidelines on how to determine ideal
temperature settings). Ignition should take place within 2 to 3 seconds. Verify that the
burners are lit by looking through the grates. If the burners do not light within this time,
turn knobs to the OFF position (See “Figures 11 and 12”) and wait 5 minutes for the gas to
dissipate before trying again. If the appliance will not light after multiple attempts, refer to
the troubleshooting section of this manual.