Spec Sheet

ManualsBrandsCrown Verity ManualsGrill AccessoriesIBI42-DD 42" Infinite Series Built-In Horizontal Drawer with 304 Stainless Steel and Soft Closing Drawers in Stainless Steel

REVISION HISTORY

REV

DESCRIPTION

DATE

APPROVED

TITLE

SIZE

Customer

DWG NO

REV

SCALE SHEET

Depth

22.750

Infinite Series

Storage Drawer 48 Inch

Engineering Release

01/01/2020

Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8

P: (519) 751-1800 www.crownverity.com

1:8

1 of 1

IBI48-DD

Crown Verity

Width

Height

Suggested Cut-out Dimensions

53.125

12.125

DRAWN BY:

Todd Stone

Material

SS 304

01/01/2020

Dimensions are in inches

Linear Tolerance: +/- .015

Bend Tolerance: +/- .020

Angular Tolerance: +/- 0.5

Radial Tolerance: +/-.005

55.723

14.731

52.819

1.437

22.250

.500

11.857

6.217

2.820

1.7511.437

Dimensions shown are the actual physical

dimensions. Additional clearances to the cabinetry

are dependent on the tolerances of the cut-out. The

suggested cut-out dimensions are listed in the chart

below but these dimensions can be reduced if the

tolerances are controlled. Please refer to the

product manual for installation instructions.

Summary of content (5 pages)

PAGE 1
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 52.819 1.437 55.723 22.250 .500 14.731 11.857 2.820 6.217 1.751 1.437 Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled.
PAGE 2
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 44.340 1.437 47.244 22.250 .500 11.857 14.731 2.820 6.217 1.751 1.437 Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled.
PAGE 3
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 38.340 1.437 41.244 22.250 .500 14.731 11.857 2.820 6.217 1.751 1.437 Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled.
PAGE 4
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 32.340 1.437 35.244 22.250 .500 14.731 11.857 2.820 6.217 1.751 1.437 Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled.
PAGE 5
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 26.340 1.437 29.244 22.250 .500 14.731 11.857 2.820 6.217 1.751 1.437 Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled.