Spec Sheet

ManualsBrandsCrown Verity ManualsGrill AccessoriesIBISC-SBNG-1D Infinite Series Natural Gas Small Built-In Cabinet with Dual Side Burner, Single Drawer, 30000 BTU and Stainless Steel Cover in Stainless Steel

REVISION HISTORY

REV

DESCRIPTION

DATE

APPROVED

TITLE

SIZE

Customer

DWG NO

REV

SCALE SHEET

Depth

24.750

Infinite Built-In Side Burner Cabinet

Engineering Release

01/01/2020

Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8

P: (519) 751-1800 www.crownverity.com

1:8

1 of 2

IBISC-SB(NG/LP)

Crown Verity

Width

Height

Suggested Cut-out Dimensions

19.125

33.000

DRAWN BY:

Todd Stone

Material

SS 304

01/01/2020

Dimensions are in inches

Linear Tolerance: +/- .015

Bend Tolerance: +/- .020

Angular Tolerance: +/- 0.5

Radial Tolerance: +/-.005

Removable Cover

Dual 15,000 BTU Burners

Electronic

Ignition Switch

Removable

Crumb Tray

Door shown with righthand

mounting option. Door hardware

can be switched for lefthand mount.

Storage area below the side

burner. Optional drawer

configurations are available at

the time of ordering or can be

installed at a later date.

Burner Control Knob

(1 of 2)

Summary of content (3 pages)

PAGE 1
REVISION HISTORY Removable Cover REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone Dual 15,000 BTU Burners Burner Control Knob (1 of 2) Electronic Ignition Switch Removable Crumb Tray Storage area below the side burner. Optional drawer configurations are available at the time of ordering or can be installed at a later date. Door shown with righthand mounting option. Door hardware can be switched for lefthand mount. Suggested Cut-out Dimensions Height 33.000 Width 19.
PAGE 2
REVISION HISTORY Dimensions shown are actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimesnions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the installation manual for additional clearances to combustibles and installation instructions. 26.442 REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 1.452 36.039 32.
PAGE 3
REVISION HISTORY For LP applications that are not connected to a bulk supply, a pull-out tank drawer is factory installed along with a hose and regulator assembly to attach to a 20 lbs. tank (not supplied) REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone Storage are below the side burner is shown with the optional utility drawer.