Spec Sheet

REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Depth
24.750
B
Infinite Built-In Side Burner Cabinet
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: [phone] www.crownverity.com
1:9
2 of 3
-
IBISC-SB(NG/LP)
Crown Verity
Width
Height
Suggested Cut-out Dimensions
19.125
33.000
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
Dimensions shown are actual physical dimensions.
Additional clearances to the cabinetry are dependent
on the tolerances of the cut-out. The suggested cut-out
dimesnions are listed in the chart below but these
dimensions can be reduced if the tolerances are
controlled. Please refer to the installation manual for
additional clearances to combustibles and installation
instructions.
21.562
34.687
36.039
26.442
32.750
10.845
2.820
.500
1.437
24.490
1.452
18.688
Through hole mounting
point for cabinet
installation
Gas connection for Natural
Gas or Bulk Propane
installations