User's Manual

CopyDisc Duplicator Series
10
When the printing process begins, blanks discs are transported one at a time from input
basket/spindle No.1 and placed into the waiting printer tray. Once printed, the discs are transported
from the tray onto output spindle No.4.
When all the blank discs from input basket/spindle No.1 have been exhausted, the CopyDisc XC
automatically moves onto the blank discs from input basket/spindle No.2
As the original output spindle (No.4) is full from printing all the discs
from input basket/spindle No.1, printed discs are now output into
empty basket/spindle No.1.
Once input basket/spindle No.2 is empty and basket/spindle No.1
full, the CopyDisc XC will begin loading discs from input
basket/spindle No. 3. Printed discs will be output into basket/spindle
No. 2.
Once all 660 discs have been copied, your CopyDisc XC
baskets/spindles should look like figure 4.
1
Figure 4
Figure 3
Figure 2