User's Manual

CopyDisc Duplicator Series

SECTION 2: SET UP

Your Verity systems CopyDisc Platinum printer series is designed to allow fast, easy, reliable and

unattended printing of CD-R discs. Following are some of the more important features of the Verity

Systems CopyDisc Platinum printer.

 Print hundreds of discs per session

 Unattended operation

 Easy to read back lit LCD display

 Network operation

2.1 Box Contents

Carefully remove your CopyDisc Platinum printer from its shipping carton and verify that all parts

are present. If there are missing or damaged parts contact Verity Systems or an authorised partner

immediately to correct any miss-packed or missing parts.

You should find the following:

 Verity Systems CopyDisc Platinum robot

 Inkjet or thermal printer

 Printer Software CD (including driver and label design software)

 Power Cord

 Input and Output Spindles (Baskets)

 Quick Start Guide

 Manual CD

 Networking CDs (including DiscPilot/CD Label Designer CD and PublisherNET CD)

 Warranty Card

Note:

Please see appropriate appendix at the back for this manual for full details of contents.

Note:

If your Verity Systems CopyDisc Platinum printer is damaged during shipment, please

contact the freight carrier first, and then contact your partner or Verity Systems.

Note:

You should save your shipping materials so that if the need arises you can return your

CopyDisc Platinum printer for service. This packaging was designed specifically for

shipping your CopyDisc Platinum printer. Other packaging may not be as suitable.

2.2 Operating Environment

Your Verity Systems CopyDisc Platinum printer should be used in a climate controlled environment

free of dirt, dust, excess humidity, excessive heat or electro-magnetic interference.

Allow at least six (6) inches of clearance around the sides and back of the unit for ventilation. Try

and provide enough room around the machine to load and unload spindles, and other work of this

type.