User's Manual

CopyDisc Duplicator Series

3.4 Menus Structure

Use the up /\ and down \/ arrow keys to position the cursor (a > character on the left most column

of the display) to the desired menu item. Then use the > key to select it.

Following is a description of each menu selection.

3.4.1 Print Only Mode

This menu option will only be visible if you have a Printer attached to your CopyDisc

Platinum Series. Use this option if you only require discs to be printed, and not

duplicated.

The menu gives the user the option to either load a new PRN files from a CD-R, or

select an existing PRN file from the HD. You can also select the quantity required.

3.4.2 Image Manager

This menu option is used to maintain image files kept on the hard drive.

Print Manager

3.4.2.1 Load New Print Image

Allows you to load a new print image to the HD from a CD-R. You will be prompted

to enter a name for the image, then press START to begin loading.

3.4.2.2 Show Print Images

Show all print images currently stored on the hard drive.

3.4.2.3 Delete Print Images

Select a print image stored on the hard drive to be deleted by positioning the cursor

next to that image. Press the > key and you are prompted to confirm deletion by

selecting either Yes or No with the > cursor. Once selected press >.

3.4.2.4 Rename Print Image

Rename a print image currently stored on the hard drive. Select an image stored on

the hard drive to be renamed by positioning the cursor next to that image. Press the

> key and you are prompted to confirm renaming by selecting either Yes or No with

the > cursor. Select Yes and press the > key. You are now prompted to enter the

new name.

Since there are no letters on the keyboard text must be entered with the arrow keys.

When text needs to be entered all available character positions are displayed

between square brackets as follows:

[ _ _ _ _ _ _ _ _ _ _ _ _ _]

If the initial text is not defined all blanks will be displayed. Otherwise the starting text

will be displayed. Press the left /\ or right \/ arrow to move the cursor the desired

character location.