Specifications

ManualsBrandsCrown ManualsAmplifier1400CSL

1400 CSL Power Amplifier

Page 17

Reference Manual

5 Accessories

There are two accessories available at the time of this

printing: the

MT-XLR

and the

MT-BB

. Important: The

MT-

XLR

and

MT-BB

must be installed at a Crown Factory

Service Center or the Crown factory.

5.1 MT-XLR

The

MT-XLR

is an accessory panel that provides two

standard 3-pin female XLR input connectors. The

MT-XLR

accessory makes it easy to quickly change

connections in a system that uses standard XLR con-

nectors. It can also be used in systems that need to

daisy chain an input signal from one amplifier to an-

other. Because the

MT-XLR

connectors are in parallel

with the amplifier’s built in phone connectors, an input

signal fed to either input can be fed to another amplifier

from the unused connector for that channel.

5.2 MT-BB

The

MT-BB

is an accessory panel that provides barrier

strip input connectors. An

MT-BB

accessory might be

desirable in applications requiring bare wire connec-

tions. It can also be used to daisy chain an input signal

from one amplifier to another just like the

MT-XLR

– +– +

CH-2 INPUT CH-1 INPUT

Fig. 5.2 The MT-BB

XLR

CH-2 INPUT CH-1 INPUT

PUSHPUSH

GND

THESE XLR INPUTS ARE CONNECTED IN PARALLEL WITH THE PHONE JACK INPUTS.

Fig. 5.1 The MT-XLR