Instruction manual

page 13

Reference Manual

Networked PIP Series

2.3 PIP-USP3/CN

Figure 2.4 IQ-PIP-USP3/CN Front Panel Controls, Indicators and Connectors

(Note: Actual Product Artwork May Vary Slightly)

A. Preset Indicator

Signals the number of the current preset, if active, by flashing a series of flashes equal to

the current preset number. See Section 4.1.2.

B. Reset/Preset Switch

Used to change presets, restore settings to factory default or restore all the presets to the

factory defaults. During operations of the switch, the Data indicator flashes as an aid to

the user. See Section 4.1.11.

C. Data Indicator

Flashes when the PIP-USP3/CN receives a valid command that is addressed to the PIP-

USP3/CN. See Sections 5.1.4 and 5.1.7.

D: Fan Vent

E. Mounting Holes

F. Balanced Audio Input Connector

Single 5-pin removable barrier-strip connector for both channels.

G. AUX Connector

AUX input or AUX output. Listen Bus is available through CobraNet.

H, I. Network Connectors

The dual RJ-45 CobraNet connectors allow a Primary & Secondary connection to the

100Mb Ethernet network. Should the Primary connection (H) lose Link activity with the

network, the USP3/CN will automatically switch to the Secondary connection (I) to

ensure uninterrupted audio and control. The indicators on the RJ-45 connectors display

network information concerning the Ethernet and CobraNet connections. See Sections

5.1.4, 5.1.6 and 5.1.7.

IN USE/

CONDUCTOR

LINK/

ACTIVITY

136763-7_4-08_networked_pip-series_reference_manual.fm Page 13 Monday, March 17, 2008 11:17 AM