User manual

SMP-M240
USER_MANUAL 10 www.syncrown.com
3.2 Basic Function
3.2.1 Printer on
The printer is powered on by pressing the 【Power】 button for about 2 seconds;
the power indicator is on with red color whenever the printer is on.
Notice: when the batter is almost exhausted, the power indicator blinks with blue
color, in this case, you must charge the battery by using the adaptor. The method of
charging the battery, please refer to 3.2.5.
3.2.2 Printer off
The printer is off after hold down the 【Power】 button for about 2 seconds. All the
indicators are off whenever the printer is off.
3.2.3 Self-test
The self-test checks the printer’s current settings, status and whether the printer has
any problems. Hold down the 【FEED】 button while press 【Power】 button about
2 seconds, the self-test begins.
The printer is ready to receive data as soon as it completes the self-test.
3.2.4 Paper feeding
When printer works under non-black mark mode, user could use 【FEED】
button to feed paper manually. Printer will stop feeding when reaching max
feeding distance. Max feeding distance could be set by the PC software
“ MPTTools”, please refer to your distributor for more technical information
of “MPTTools”.
3.2.5 Battery Charging
When li-ion battery runs out of power, blue LED indicator flash slowly and buzzer will
give out warning. It will power off automatically when continues printing. If you want
to go on, please charge it.
Charging method: Plug in socket ( 220V,50Hz) with power adapter.
Power-off charging：LED light will always indicate blue color and goes off when fully
charged.
Power-on charging： LED light will keep blinking in blue color, and stop blinking
when fully changed.
When charging, printing is available.