Specifications

Two-element Vertical Array in a Long-Throw/Short-
Throw Configuration
Array 13
Application Engineered 2-way 12” loudspeakers
horizontally configured and vertically splayed
 This low-profile array is a good choice for smaller L/R or exploded clusters.
 The stacked low-frequency drivers provide additional vertical pattern control to increase gain
before feedback.
 H.F. waveguides are rotated 90
o
from standard. A 60
o
x 40
o
waveguide is typically used for the
upper enclosure and a 90
o
x 50
o
waveguide for the lower; however 60
o
x 40
o
waveguides for
both positions may better match some seating section geometries in fan shaped rooms.
Array Specifications
 Loudspeakers: (1) AM7212/64, (1) AM7212/95
Medium Power Solution: (1) AM5212/64, (1) AM5212/95
 Overall Coverage: 60/90 horizontal x 100 vertical
 Vertical box-to-box splay angle: 40
o
(60
o
x40
o
over 90
o
x50
o
), 35
o
(60
o
x40
o
over 60
o
x40
o
)
 Frequency range: 40 Hz – 19 kHz
( 55 Hz – 20 kHz for Medium Power)
 Maximum SPL (1 meter equivalent): 130 dB-SPL cont. avg.
(126 dB-SPL for Medium Power)
 Total Power Capacity: 1200W (700W for Medium Power)
 Overall Dimensions: 29.5” H x 28” W x 22” D (750 x 712 x 559mm)
 Total Loudspeaker Weight: 102lbs. (47kg) (
90 lbs (41kg) for Medium Power Solution)
Recommended Amplification:
 AM7212 x 2: 2 ch. 1000W [Crown CTs2000]

Medium Power Solution: AM5212 x 2: 2 ch. 600W [Crown CTs1200]
Recommended DSP:
 2 channels required
(2 channels for Medium Power) . [Crown PIP-USP3, dbx Driverack 260,
BSS FDS-334, BSS FDS-366, BSS SoundWeb]
Available Accessories
 3 pc. M10 x 35mm Forged Shouldered Eye-Bolt Kit (JBL part #229-00009-01)
ARRAY OVERVIEW
26