Specifications

Two-element Vertical Array in a Long-Throw/Short-
Throw Configuration
Array 14
Application Engineered 2-way 15” loudspeakers
horizontally configured and vertically splayed
 This low-profile array is a good choice for smaller L/R or exploded clusters in speech + music
systems.
 The stacked low-frequency drivers provide additional vertical pattern control to increase gain
before feedback.
 H.F. waveguides are rotated 90
o
from standard. A 60
o
x 40
o
waveguide is typically used for the
upper enclosure and a 90
o
x 50
o
waveguide for the lower; however 60
o
x 40
o
waveguides for
both positions may better match some seating section geometries in fan shaped rooms.
Array Specifications
 Loudspeakers: (1) AM7215/64, (1) AM7215/95
Medium Power Solution: (1) AM5215/64, (1) AM215/95
 Overall Coverage: 60/90 horizontal x 85 vertical
 Vertical box-to-box splay angle: 40
o
(60
o
x40
o
over 90
o
x50
o
), 35
o
(60
o
x40
o
over 60
o
x40
o
)
 Frequency response: 35 Hz – 19 kHz
( 40 Hz – 20 kHz for Medium Power)
 Maximum SPL (1 meter equivalent): 133 dB-SPL cont. avg.
(130 dB-SPL for Medium Power)
 Total Power Capacity: 1200W (700W for Medium Power)
 Overall Dimensions: 33” H x 31” W x 26” D (839 x 787 x 660mm)
 Total Loudspeaker Weight: 120lbs. (55kg) (
110 lbs (50kg) for Medium Power Solution)
Recommended Amplification:
 AM7215 x 2: 2 ch. 1000W [Crown CTs2000]

Medium Power Solution: AM5215 x 2: 2 ch. 600W [Crown CTs1200]
Recommended DSP:
 2 channels required
(2 channels for Medium Power) . [Crown PIP-USP3, dbx Driverack 260, BSS FDS-
334, BSS FDS-366, BSS SoundWeb]
Available Accessories
 3 pc. M10 x 35mm Forged Shouldered Eye-Bolt Kit (JBL part #229-00009-01)
27
ARRAY OVERVIEW