Product specifications

The Formwork Experts
26 999759002 - 06/2008 Ü
User information Doka heavy-duty supporting system SL-1
using Bracing bolt SL-1 and Brace
stirrup SL-1
a ... 330 mm
d1 ... diameter 24 mm (for Tie-rods 15.0 and 20.0mm)
This type of tension-rod brace is mainly used in
cases where the HD supporting units are travelled
on Heavy duty roller gear SL-1.
The Brace stirrup SL-1 is designed so that the tie-
rods do not protrude down beyond the Bracing
bolt.
This means that when the unit is travelled, there is
no risk of any tie-rods colliding with the "Guidances
for heavy duty roller gear SL-1".
☞
Tension-rod bracing is only permitted to the
inside holes "a", as otherwise it would not be
possible to centre the Bracing bolt!
Tension-rod brace using Tie-rod 20.0: Z
perm.
=
140 kN
Tension-rod brace using Tie-rod 15.0: Z
perm.
=
90 kN
A System beam SL-1
B Bracing bolt SL-1
C Brace stirrup SL-1
D Hexagon nut 15.0 or 20.0
E Split nut SL-1 15.0 or Hexagon nut 20.0
F Tie-rod 15.0 or 20.0
G Guidance for heavy duty roller gear SL-1 with Heavy duty
roller gear SL-1
9759-257-01
a
d1
Z
Z
A
B
C
D
E
G
F
9759-233-01