Product specifications

User information Doka heavy-duty supporting system SL-1
37999759002 - 06/2008 Ü
The Formwork Experts
Placing and attaching the Doka
beams
Doka beams and walings are quickly assembled
into finished elements, using simple connecting
devices - either on-site or by the Doka "Ready-to-
Use" Service.
Various ways of fastening the Doka beams
Flange claw
Also for subsequent fastening of Doka H20/H30
beams or squared timbers to any position on wal-
ings and (IPB-section) steel girders.
Tools needed:
● Drill bit, diam. 12 mm
● Reversible ratchet 1/2"
● Nut for box spanner 19
Clamping ranges [cm]
Clamping ranges [cm]
Fastening plate
For formwork elements intended for high numbers
of repeat uses, or for providing stiffening reinforce-
ment and for transferring longitudinal forces.
Can only be screwed onto the ends of the waling (in
the case of walings of 1.00 m and above), to the left
or right of the connection plate, in the flanges.
Tools needed:
● Drill bit, diam. 17 mm
● Reversible ratchet 1/2"
● Box nut 24
● Fork spanner 24
Flange-clamp G
- for fastening the Doka beam H20 anywhere on the
waling.
Can also be used on steel girders such as I-girders
etc.
Note:
First push the flange-clamps onto the Doka beam,
and only then place the Doka beam onto the waling.
Tools needed:
● Reversible ratchet 1/2"
● Nut for box spanner 19
c ... Bottom of formwork
Clamping ranges [cm]
Clamping ranges [cm]
Double-headed nails 80mm
The connection plates serve as stop-bars for the
edge beams and can also be used for fixing the
beams in place.
Fasten the Doka beam to the connection plate with
4 double-headed nails.
b 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
a
min
17.3 17.1 17.0 16.7 16.3 16.0 15.5 14.8 14.2
a
max
29.0 28.9 28.8 28.7 28.6 28.4 28.1 27.7 27.4
b 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5
a
min
13.4 12.5 11.4 10.1 10.0 10.0 10.0 10.0 10.0
a
max
27.1 26.7 26.0 25.5 25.1 24.4 23.7 23.0 22.2
9759-286-01
9759-286-02
a
b
9759-287-01
9759-287-02
b 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
a
min
15.8 15.8 15.0 14.5 13.4 13.2 13.0 13.0 12.8
a
max
23.8 23.3 23.2 22.7 22.3 21.9 21.3 20.7 20.0
b 4.5 5.0 5.5 6.0
a
min
12.3 11.5 11.8 12.0
a
max
19.3 18.2 16.8 14.6
9732-242-01
9732-343-01
a
b
c
9759-288-01
9759-288-02