Product specifications

The Formwork Experts
44 999759002 - 06/2008 Ü
User information Doka heavy-duty supporting system SL-1
Repositioning using Hydraulic drive
SL-1
How to mount:
Smooth long-term operation can only be ensured if
the Hydraulic drive SL-1 has been correctly installed
onto the travel-system.
➤ Insert the toothed shaft into the housing on the
Hydraulic drive SL-1.
➤ Push the bolts through the holes in the gear-unit
housing.
➤ Bolt the Hydraulic drive SL-1 to the gear-unit
housing.
➤ To attach the Hydraulic drive, use only the
enclosed 16 hexagon socket cheese-head
screws, M10x90 8.8 DIN 912. All the connection
holes on the gear-unit flanges must be used.
➤ Lubricate the screws with WD40.
➤ Push the Flanged wheel SL-1 onto the toothed
shaft.
➤ Fix the flanged wheel to the gear-unit housing
with hexagon nuts.
➤ Bring the complete drive unit to the installation
position on the system beam and attach it with
hexagonal bolts.
D Hydraulic drive SL-1
E Toothed shaft
F Bolt
G Gear-unit housing
Tightening torque: 15-20 Nm
Ensure that the Hydraulic drive (D) is in the
horizontal.
9759-300-01
E
G
D
F
☞
➤ The hydraulic drive is unable to transfer
either radial or axial forces. For this rea-
son, great care must be taken to ensure
that it is fitted coaxially and at right-
angles to the sleeve shaft.
A Flanged wheel SL-1 220kN
H Hexagon nut M36 (width-across: 55 mm)
I Complete drive unit
J System beam SL-1
K Four M20x55 8.8 hexagonal bolts + 4 washers (included in
scope of supply of Item A)
Follow the directions in the "Hydraulic drive
SL-1" Operating Instructions!
9759-301-01
A
H
9759-306-01
I
K
J