WET AND DRY VACUUM CLEANER INSTRUCTION MANUAL Model No.: WVC-1220 IPX4 Before operating this appliance, please ensure that you read & understand all the instructions that apply to it, as failure to comply with these instructions may result in personal injury to other person, and also increase the risk of fire of electrical shock. Please ensure that any replacement parts or accessories used with this appliance are correctly and/or securely fitted before use.
1. Product Characteristics (1) Vacuum cleaner for wet and dry (2) Carpet and sofa washing function (3) Jacks on the base for depositing accessories (4) Blowing function, satisfying different requirements 2. Including Units and Accessories 4 1 12 5 2 3 6 7 13 14 9 10 11 8 1. Tank unit ( head, Tank, base ) 2. Flexible hose + detergent spray gun 3. 2pcs connection tubes 4. HEPA filter ( optional ) 5. Sponge filter ( optional ) 6. Sponge filter 7. Dust bag ( for dry use ) 8.
. Installation Process (1). Base & wheels (2). Detergent tank Press the 2pcs front wheels into the base position, and screw the 2pcs rear wheels. Fit the detergent tank on the base, with the humps into the slots; Press the detergent tank onto the stainless steel one, and buckle it. (3). Filters ○,1Head unit ○,2HEPA filter 2. Insert the water valve unit into the head unit, and turn it clockwise to lock. ○,3Sponge filter ○,4Water valve unit ○,5 Sponge filter ○,6 Water seperation cover 1.
.Buckle the head unit on the tank well after upper process. (4). Hose, tube, brush & detergent pipe Check the leakproofness and tightness of the following junctures of different parts, in case of suction and sewage leakage. hose end 1. Connect the hose, 2pcs tubes and different kinds of brushes together according to the picture; different brushes should be connected with the detergent spray gun, or 2pcs tubes respectively; twist the hose end clockwise.
sealing lock of the detergent pipe 2. Before operating the detergent sprayer, fit all the sealing locks at the right position and twist them clockwise. (5). Detergent 1. Fill the detergent tank with detergent; the max volume is 3L; 2. Thick detergent should be diluted or the pipe might be clogged. 5 The detergent level indicator should always be under the opening of the detergent tank, otherwise detergent will be hard to pumped out.
4. Operation (1). Switch At ‘I’ stage, the unit works as a common wet&dry vacuum cleaner; at ‘O’ stage, it’s switched off; at ‘ ’ stage, the detergent pump and spray gun works. (2). Carpet & sofa washing Choose the corresponding brush for cleaning and please review Part 2 for learning what brush it should be; make sure that there’s enough detergent in the tank for keeping the best performance; dust bag should be removed as sewage will ruin it.
(3). Floor cleaning (4). Airflow adjustment Press the button on the detergent spray gun to adjust the suction. Use the wet&dry floor brush for cleaning floor, dust, rubbish, spillage, etc. (5). Blowing function blower 1. Insert the end of the plastic hose into The blower, and twist it clockwise to Lock; 2. Switch on the vacuum cleaner to start the blower. hose end (6).
5. Safety Instruction (1) Before operation, please check if the local power supply is the same as it’s rated in the label. (2) If there’s any liquid out from the blower, do not overturn the appliance when repairing it in case that water goes into the motor and causes damage. (3) Do not use this machine as a pump. (4) Remember to turn off the appliance and remove the plug every time after use or when being repaired.
(13) Do not collect objects which can easily attach on the filter such as calcareousness powder, gesso and graphite powder. Because those will block the ventilation damage motor. (14) Do not overturn the machine in case water goes into the motor and damages the motor. 6. Protective device (Water valve) (1) When the water in the barrel is full, the device begins to work. The suction power will vanish at this moment. The machine will make some noise which indicates the motor is running at high speed.
* After heavy work or when the barrel is full of dust and sewage which causes suction decrease, please follow the procedure for maintenance. (1) Unfasten the clips and leave the head unit. (2) Take off the filter bag, pour out and clean up the dust and sewage in tank, and wipe the tank dry. (3) Wash and clean the filters, including HEPA filter and sponge filters; filters should be dried before the next use. As filters are consumables, please replace them accordingly for keeping the best performance.
Weak suction 1. Filters / tubes / hose/ suction port is blocked. 2. The tank is not lidded well. 1. Clean up the filters and the accessories, or make use of the filtercleaning function. 2. Reset the head unit and buckle it on the tank. abnormal noise when working 1. Sewage in the tank is out of capacity and water valve works. 2. The vacuum cleaner is turned over and water valve works. 1. Clean up the sewage in tank. 2. Right the vacuum cleaner In time.
