XLS Series Operation Manual XLS 1000 XLS 1500 XLS 2000 XLS 2500 Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000. This manual does not include all of the details of design, production, or variations of the equipment.
XLS Series Power Amplifiers Important Safety Instructions 1. Read these instructions. WATCH FOR THESE SYMBOLS: 2. Keep these instructions. The lightning bolt triangle is used to alert the user to the risk of electric shock. 3. Heed all warnings. 4. Follow all instructions. The exclamation point triangle is used to alert the user to important operating or maintenance instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
XLS Series Power Amplifiers DECLARATION OF CONFORMITY Issued By: Harman International. 1718 W. Mishawaka Rd. Elkhart, IN 46517 U.S.A. FOR COMPLIANCE QUESTIONS ONLY: Sue Whitfield 574-294-8289 Sue.Whitfield@harman.com European Representative’s Name and Address: David J.
XLS Series Power Amplifiers Get Started Stereo Bypass Mode This is the default mode the amplifier is set to from the factory. The amplifier is configured for stereo mode with the PureBand™ Crossover System Bypassed. 1. Connect Left/Right signal source to Channel 1 and Channel 2 using either the XLR, ¼ Inch, or RCA connectors. 2. Connect a speaker to each channel output using Speakon®, Banana Plugs, or bare wire.
XLS Series Power Amplifiers Get Started HighPass Mode When using the “HighPass Mode”, the amplifier is configured to use a HighPass Filter on Channel 1 and Channel 2 at the selected frequency. Before you get started ensure that you: 1. Connect Left/Right signal source to Channel 1 and Channel 2 using either the XLR, ¼ Inch, or RCA connectors. 2. Connect a speaker to each channel output using Speakon®, Banana Plugs, or bare wire. Follow these quick steps to configure the amplifier for “HighPass Mode”: 1.
XLS Series Power Amplifiers Welcome Crown’s XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability that effortlessly deliver the goods night after night. We packed XLS with enormous flexibility, thanks to its integrated Crossover and PeakX™ Limiters. The XLS weighs under 11 pounds, compared to 40 pounds for its competitors. Simply put, the XLS is the most powerful, flexible, efficient amp available in its class.
XLS Series Power Amplifiers Front Panel Features Indicators: Signal Presence Indicator: Two green LED’s, one for each channel, illuminate when the channel input signal exceeds -40dBu -10 Indicator: Green LED flashes when output signal level exceeds -10dB below clip -20 Indicator: Green LED flashes when output signal level exceeds -20dB below clip Clip Indicator: Two red LED’s, one for each channel, illuminate when the channel’s output is being overdriven.
XLS Series Power Amplifiers Integrated Processing Features PureBand™ Crossover System: The PureBand™ Crossover System provides a variable state Linkwitz-Riley 24dB/octave filter allowing you to choose a point between 50Hz and 3kHz on 1/12th octave centers.
XLS Series Power Amplifiers XLS Specifications Performance Sensitivity (for full rated power at 8 ohms): 1.4 Vrms. Frequency Response (at 1 watt, 20 Hz to 20 kHz): +0 dB, –1 dB. Signal-to-Noise Ratio Rated as dBr to full rated 8Ω power output (A-Weighted): XLS 1000 > 97 dB XLS 1500, XLS 2000, XLS 2500 > 103 dB Total Harmonic Distortion (THD): < 0.5%. Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to –30 dB: < 0.3%. Damping Factor (8 ohm) 10 Hz to 400 Hz: >600.
XLS Series Power Amplifiers XLS Specifications –20 Indicator: Green LED flashes when output signal level exceeds –20 dB below clip. –10 Indicator: Green LED flashes when output signal exceeds –10 dB below clip. Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven. Thermal Indicator: Two red LEDs, one for each channel, illuminate when thermal compression begins.
XLS Series Power Amplifiers Service Crown amplifiers are quality units that rarely require servicing. Before returning your unit for servicing, please contact Crown Technical Support to verify the need for servicing. Warranty is only valid within the country in which the product was purchased. This unit has very sophisticated circuitry which should only be serviced by a fully trained technician.
XLS Series Power Amplifiers Service 3. Ship product to: CROWN AUDIO FACTORY SERVICE 1718 W MISHAWKA RD. ELKHART, IN 46517 4. Use a bold black marker and write the SRA number on three sides of the box. 5. Record the SRA number for future reference. The SRA number can be used to check the repair status. Packing Instructions Important: These instructions must be followed. If they are not followed, Crown Audio, Inc. assumes no responsibility for damaged goods and/or accessories that are sent with your unit. 1.
XLS Series Power Amplifiers Warranty — UNITED STATES & CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three (3) years from the date of purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and workmanship.
XLS Series Power Amplifiers Warranty — WORLDWIDE EXCEPT USA & CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A.
XLS Series Power Amplifiers PRODUCT REGISTRATION Crown Audio, Inc. 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 Phone: 574-294-8000 Fax: 574-294-8329 www.crownaudio.com Online registration is also available at http://crownweb.crownintl.com/webregistration. Warranty is only valid within the country in which the product is purchased. When this form is used to register your product, it may be mailed or faxed. Crown Audio, Inc.
XLS Series Power Amplifiers Crown Audio Factory Service Information Shipping Address: Crown Audio Factory Service, 1718 W. Mishawaka Rd., Elkhart, IN 46517 PLEASE PRINT CLEARLY SRA #: ______________________ (If sending product to Crown factory service.
XLS Series Power Amplifiers Notes Operation Manual page 37
THE XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability. This high-performance line consists of four models, each providing enormous power and flexibility thanks to the integrated PureBand™ Crossover System and Peakx™ Limiters. And weighing in at only 11 lbs or less, they provide the ultimate in lightweight portability.
PERFORMANCE INPUT/OUTPUT Sensitivity (for full rated power at 4 ohms): 1.4 Vrms. IInput Connectors: XLR (one per channel), 1/4 inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers. Frequency Response (at 1 watt, 20 Hz to 20 kHz): +0 dB, –1 dB. Signal-to-Noise Ratio Rated as dBr to full rated 8 ohm power output (A-Weighted): XLS 1000 > 97 dB XLS 1500, XLS 2000, XLS 2500 > 103 dB Total Harmonic Distortion (THD): < 0.