User manual

This is the second page in the XOVER module. This page is for editing the LOW
PASS filter on the “Low Outputs”. The low outputs will only be available in a 2-
Way or 3-Way configuration.
This GRAPH shows
you how the
crossover points are
set a at a glance.
This shows which
OUTPUTS you are
editing.
L=”Lows”
This is the crossover
point which is edited
on this page.
This is the crossover
FREQUENCY for the
low pass on the low
outputs.
This is the filter
type and slope
selected for the low
pass filter for the low
outputs.
Prev Slide Next Page
Xover (Crossover)
Index
51