User manual

This is the third page in the XOVER module. This page is for editing the HIGH
PASS filter on the “Mid Outputs”. The mid outputs will only be available in a 3-
Way configuration.
This GRAPH shows
you how the
crossover points are
set a at a glance.
This shows which
OUTPUTS you are
editing.
M=”Mids”
This is the crossover
point which is edited
on this page.
This is the OUTPUT
GAIN for the mid
outputs.
This is the crossover
FREQUENCY for the
high pass on the mid
outputs.
This is the filter
type and slope
selected for the high
pass filter for the mid
outputs.
Prev Slide Next Page
Xover (Crossover)
Index
52