User manual

This is the fourth page in the XOVER module. This page is for editing the LOW
PASS filter on the “Mid Outputs”. The mid outputs will only be available in a 3-
Way configuration.
This GRAPH shows
you how the
crossover points are
set a at a glance.
This is the crossover
point which is edited
on this page.
This is the crossover
FREQUENCY for the
low pass on the mid
outputs.
This is the filter
type and slope
selected for the low
pass filter for the mid
outputs.
This shows which
OUTPUTS you are
editing.
M=”Mids”
Prev Slide Next Page
Xover (Crossover)
Index
53